Outdoor Banner Frame FAQs - The Banner Bar
Get answers to common questions about outdoor banner frames. Find solutions to your FAQs on outdoor banner frame installation, maintenance, and more.
How does The Banner Bar increase banner durability?
The short answer: The telescoping bar prevents the vertical T-posts from collapsing inward while the banner is wind-loaded.
The long answer: The telescoping bar is the primary component that increases banner durability however the bungees and pole covers also play a key roll in how The Banner Bar works. The bungees are sized specifically for The Banner Bar, providing the right amount of tension on the banner while providing the perfect "give" in windy conditions. The pole covers improve the durability of the bungees by preventing the bungees from wearing out against the sharp edges of the T-posts. When installed correctly (per the provided instructions and install videos), The Banner Bar is guaranteed to increase the durability of a banner over hanging a banner with rope between two T-posts.
Are T-posts included with The Banner Bar kits?
T-posts are not included with the kits. T-posts are available in most cities and towns at an inexpensive price (under $10 each). We found that the cost of shipping heavy / long T-posts was cost prohibitive when they are readily available in most areas. Do not buy the "garden variety" T-posts sold at most home improvement stores.
What length of T-posts is required?
The Banner Bar is designed to use 6'-6" long T-posts with a minimum weight of 1.25 lbs per foot. This length provides the proper amount of T-post in the ground (below grade) to support wind-loading.
What tools do I need to install T-posts?
You will need a T-post Driver to properly drive T-posts into the ground. We also highly suggest wearing hearing protection and gloves when driving T-posts.
What is the maximum banner height supported by The Banner Bar?
All Banner Bar kits will support 4' high banners. When a 4' high banner is installed, the bottom of the banner will be approximately 1" from the ground. If you are installing Three Post or Four Post kits, we recommend limiting your banner height to 42" to allow room for the wind to escape below the banner.
Can The Banner Bar be customer installed?
Yes, The Banner Bar was designed to be installed by the end user.
Are replacement parts available?
Yes, we offer all replacement parts in the event that a Banner Bar is vandalized, damaged or parts have been lost. Call for replacement part pricing: 623-242-5034.
Why is The Banner Bar the best banner frame?
- Easy to install - Takes only 15 to 20 minutes to install in a typical lawn area
- Can easily be relocated
- Perfect for events, business promotion, medical offices, construction site signs, real estate, temporary signs, banks, non-profits, automotive dealerships, etc.
- Looks clean and professional
- Easy to change for new banner campaigns
- Withstands very windy conditions
- Minimal visual impact when a banner is not in use
- Bungees provide the right amount of "give" in windy conditions to provide long banner life
- The telescoping features allows several different configurations with the same frame
- The telescoping feature allows for small adjustments to be made when installing
- Four different configurations available
- Made in USA!
The Banner Bar Quality Guarantee
The Banner Bar is proudly
Made in the USA! We've designed the Banner Bar using the best materials available for outdoor durability and product longevity. We guarantee your satisfaction of our banner display product. If after receiving your Banner Bar kit you feel it does not meet your expectations, you may return the kit for a full refund under the following terms:
- The Banner Bar kit is in new condition and has not been installed
- The Banner Bar kit must be returned in it's original packaging
- The Banner Bar kit has not been damaged in shipping
- All components are accounted for and included
- Return shipping is paid by the customer
Limited Hardware Warranty – 1 year warranty from date of purchase covers parts and labor which warrants product against defects in material and workmanship. Hardware consists of all components of The Banner Bar
except for the bungees. The one year limited warranty covers the pole covers, caps, bungee retainers, t-clips, push pins, D-pins and the aluminum bar.
The warranty does not cover improper installation methods, vandalism, miss-use, damage from accidents, normal wear and tear or extreme acts of God such as tornadoes, hurricanes, etc. Products found to be defective will be replaced or repaired at factory's discretion.
To submit a warranty claim, a photo of the original installation as well as a photo of the The Banner Bar taken at the time of the claim must be submitted for review. Arrowhead Signs & Displays reserves the right to approve or refuse a product repair or replacement if photos are unavailable.
Replacement Parts – Parts are available for purchase if your Banner Bar has been damaged from vandals, accidents, loss of parts, etc.
Consumables – The bungees are a consumable component of The Banner Bar kit with a variable life depending on their exposure to the elements. Under normal use, bungees typically last four to five months of consistent use before needing replacement. Our bungees are specifically made to fit The Banner Bar using top quality materials (Made in USA). Replacement bungees can be purchased offline. Please contact us for ordering bungees.
